After advocacy from small businesses across the country that represent the specialty automotive aftermarket and other key stakeholders, the U.S. Environmental Protection Agency (EPA) is delaying tailpipe emissions reduction requirements from model year 2027 to model year 2030.
The EPA’s final rule also slightly increased the average tailpipe emissions for light-duty vehicles, increasing the standard to 85 grams/mile from 82 grams/mile for model year 2032, according to a press release.
While the agency’s final ruling provides automakers with additional time to ramp-up production of zero-emissions vehicles (ZEVs), currently, only electric vehicles (EVs) and five plug-in hybrid electric vehicles (PHEV) meet the easier 85 grams/mile standard. It is estimated that 67% of new vehicles sold would have to be EVs by 2032 to meet this standard. Automakers could also comply with the final rule if EVs account for 56% of new vehicle sales and PHEVs comprise 13% of model year 2032 sales.
The Specialty Equipment Market Association (SEMA) opposes the EPA’s final standards for model year 2027 to 2032 light and medium-duty vehicles, which still forces automakers to sell EVs and PHEVs to comply with the rulemaking and further limits internal combustion engine technology options.
“The EPA has taken a small step in the right direction by providing automakers and specialty aftermarket businesses additional time to develop innovative solutions to reduce emissions. While I am proud of our industry’s role in helping to delay the EPA’s most aggressive EV mandates, there is still much work to do to get government regulators to embrace technology-neutral solutions that will reduce emissions while limiting adverse impacts on small businesses and consumer choice,” said SEMA President and CEO Mike Spagnola in response to the EPA’s final rulemaking.
“SEMA has long advocated that government mandates, including those designed to support the sale of EVs and eliminate the sale of internal combustion engine (ICE) vehicles, are the wrong approach to reducing motor vehicle emissions. The federal government and states should take an ‘all of the above’ approach to vehicle technology, incentivize innovation, and allow the market to determine the best ways to reach improved emissions goals,” noted Spagnola.
SEMA, its members and car enthusiasts across the country were vocal in opposing the EPA’s initial rule after it was proposed in April 2023. Over 7,500 SEMA members and automotive enthusiasts wrote to the EPA last year in opposition to the then-proposed rulemaking’s efforts to effectively mandate the production and sale of EVs, according to the release.
Notably, one-third of consumer spending on performance and accessory products goes toward upgrading ICE vehicles and drive trains, and 25% of SEMA manufacturers produce ICE-related components. This final rule will reduce consumer choice and increase the costs to purchase new vehicles. It will also disrupt the used car market as used ICE engine vehicle inventory will begin to decline, thus increasing prices and making it less affordable for those who need the used vehicle market for its typical affordability and accessibility.
Specialty automotive aftermarket businesses continue to lead the way with innovative solutions to reduce vehicle emissions. Aftermarket manufacturers are at the forefront of adapting ICE engine technologies to run alternative fuels and converting older vehicles into cleaner technologies. The EPA’s regulation embraces a strategy that favors one technology solution at the expense of thousands of small businesses and hundreds of thousands of workers across the country.
