Advertisement

Showcase: Grilles & Guards

And you and your customers can count on the tough and the good-looking grilles and guards to dress up and protect vehicle fronts. Whether for glitz or grit or both, these products serve fleet, commercial and daily driver needs. Product images at the bottom of this article.

BUMPERS
TrailReady Products
, Everett, Wash., presents its full line of Extreme Duty Bumpers. Base bumper (without any grille guard tubing) for smooth sano look. Bumpers feature 1/4" steel construction in the critical areas, full welding inside and out, “D” ring shackle mounts and quad light ports. Applications available for nearly all rigs including Jeeps.
USE INFO #406

EURO-STYLE GRILLE GUARDS
Dee Zee
, Des Moines, Iowa, offers its Euro-styled Grille Guards for pickups and SUVs. Made from 1.5"-diameter stainless steel or 18- gauge black powder-coated steel tubing.  Rubber bumper pads protect steel from scratches and dents.  Headlight guards are removable, and two steel tabs are included for mounting auxiliary lights.  No-drill installation; bolts on to most of today’s popular truck and SUV styles.
USE INFO #401

2" STAINLESS STEEL GRILLE GUARD
Westin Automotive Products Inc.
, Irwindale, Calif., makes available its HDX Grille Guard for heavy-duty full-sized trucks. Features 2" tubular design and full mesh center grille. Available in polished 304 stainless steel and black powder-coated finishes.
USE INFO #400

FULL-SIZE VEHICLE GRILLE GUARD
Go Industries
, Richardson, Texas, offers its Rancher Grille Guard™ for full-size trucks, SUVs. One-piece, fully welded guard provides front-end protection for the headlight and grille areas. Constructed of 1.9"14-gauge steel tubing and 1/4" laser-cut steel uprights. Center section is 16-gauge steel with 1/2" punched holes. Designed for specific vehicle model. No-drill mounting bracket system utilizes existing holes in the frame. Built-in, wide “Step Plate” for access to hood and engine. Black powder-coat finish.
USE INFO #404

ROCK CRAWLER LINE
Bestop
, Broomfield, Colo., makes available its HighRock 4x4 line developed specifically for the hard-core rock crawler. The High Access Bumper for the TJ features extreme approach angles to get over and around obstacles. The Tubular Grill Guard is sold separately. All bumpers offer fair-lead attachment plates, attachment points for all winches and D-ring attachment ears that mount solidly to the frame.
USE INFO #402

REPLACEMENT BUMPERS, GRILLES
Busckstop Truckware
, Newberg, Ore., presents its full-replacement bumpers for trucks, vans, and SUVs from the mid-1980s through 2011. Features winch mount with enclosed latching door, recessed light buckets and 2" trailer receiver. Custom options include different colors, polished stainless steel, additional light options, five different grille guard styles, several specialized add-ons and stripped down versions for fleet/industrial applications. U.S.-made.
USE INFO #416

REPLACEMENT BUMPERS
Tough Country Products
, El Campo, Texas, offers its line of full replacement bumpers, steps, headache racks and brush guards built with such custom options as fog light sleeves and winch box. The pictured 2011 Ford is outfitted with a Deluxe Front Replacement bumper with 4" pipe, wheel to wheel. Comes standard with nine-step, high-gloss black industrial powder coat. U.S.-made.
USE INFO #407

BILLET GRILLES
Carriage Works
, Grandview, Mo., offers its complete line of Billet Grilles for the most popular trucks, mini trucks and SUVs from 1969-2011. These cosmetic upgrades are computer designed and produced utilizing robotics and automation to ensure fit and finish.  Also, an expanding line of Wire Mesh Grilles for latest popular applications. Made in the United States.
USE INFO #410

STAINLESS STEEL BULL BAR
Luverne Truck Equipment Inc.
, Brandon, S.D., introduces its Bull Bar constructed from high-polish, 3"-diameter 304 stainless steel with a matching high-polish stainless steel, laser-cut skid plate. Black powder-coated 1/4" steel brackets. Includes light mounting holes and license plate brackets. Features universal bull bars and vehicle-specific mounting brackets for Chevrolet/GMC, Ford, Dodge or Toyota full-size pickups.
USE INFO #411

QUICK-FIT GRILLE OVERLAY
Coast to Coast International, Tampa, Fla., presents its grille overlay for 2011 GMC Sierra HD.  Snap-into-place installation. Constructed of high-impact, chrome-plated ABS, CCI.  This application is for the, part number IWCGI/90.
USE INFO #418

2010-11 MUSTANG GT ‘E’ GRILLE
3dCarbon
, Newport Beach Calif., presents its 2010-11 GT Mustang with the “E” grille. Manufactured in injection-molded black plastic; replaces the factory GT grille while retaining OE lights. No painting or maintenance required for installation. Installs with all original factory screws and clips; no cutting or splicing required. Running Pony emblem available as optional accessory.
USE INFO #419

H.I.D. BULLET GRILLE LIGHT BAR FOR WRANGLER JK
Delta Tech Industries, Ontario, Calif., introduces its HID Bullet Grill Light Bar for Jeep Wrangler JK (2007-10). Constructed of 13-gauge powder-coated plasma-cut steel that encases three Bullet Series HID driving lights with internal ballasts for resistance to elements. Micro-adjustment for vertical aiming. Mounts to existing bumper bolts. Near-daylight visibility even in extreme weather conditions.  High-tempered glass lenses. Also available in xenon configuration. Has OEM-style pre-terminated wiring harness, switch, relay and installation instructions. Made in U.S.A.
USE INFO #403

MODULAR WINCH MOUNT GRILLE GUARD
Steelcraft Automotive
, Corona Calif., introduces its modular winch-mount grille guard. Constructed with 1-1/2" steel cross tubing, heavy-duty winch tray, uprights and eCoated in black. Available with universal center section, universal winch tray and bracket kit (bracket kits are specific part numbers) for full-size pickup trucks. Shown with optional brush guard.
USE INFO #413

GRILLES FOR F-250 & 350 SD
E&G Classics, Columbia, Md., presents its E-Power Series truck grilles. Begin with a combination of chrome, mirror stainless and multi-finish black powder-coated surfaces to create “visual depth.” Available for newly updated 2011 Ford F-250/350 Super Duty truck.
USE INFO #414

BULL BAR
Romik
, Brooklyn, N.Y., makes available its Bull Bar with hand-polished welds and laser-cut mounting brackets. Designed and fitted to each individual vehicle. Complies with all European Crash Test standards.
USE INFO #409

BULL BARS, NERF BARS
Broadfeet Motorsport Equipment
, Brooklyn, N.Y., provides its 2010 Toyota 4 Runner accessories including 3” and 2.5” bull bars, 3” front Urban Bar, 3” side steps nerf bars as well as single and rear bumper guards. In stainless steel and black powder-coat. No-drill. Includes hardware and bolt-on no drilling. For most of today’s popular SUV, CUV and trucks
USE INFO #421

WINCH GUARD
Go Rhino! Products
, Brea, Calif., makes available its modular Winch Guard. Compatible with most winches with up to 16,500 lbs. of capacity. Includes heavy-duty reinforced mounting brackets and hardware. Comes pre-drilled for mounting lights and is available in black (five-year warranty) or polished stainless (lifetime warranty) finish.
USE INFO #417

V6/GT BILLET REPLACEMENT GRILLE
Classic Design Concepts
, Novi., Mich., offers its billet replacement grille for the Mustang GT V6. Available in a black powder-coat or brushed-aluminum finish with clear powder-coat. Installs using factory mounting points (no modification required) and retains factory radiator cover. Optional Tri-Bar Pony emblem for a retro look.
USE INFO #420

GRILLE/BRUSH FOR 2011 GRAND CHEROKEE
Aries Offroad
, Lomita Calif., introduces its grille/brush guard for the 2011 Jeep Grand Cherokee. Constructed as one-piece unit. Contours to lines of the Grand Cherokee. No-drill installation. Available in carbon steel with a black powder-coat finish or in high-luster 304 stainless steel.
USE INFO #412

CJ, WRANGLER FRONT BUMPER
Rugged Ridge division of Omix-Ada
, Suwanee, Ga., unveils its XHD Front Bumper System for 1976-2011 Jeep CJ/Wranglers. Modular bumper base allows choice of components to build the exact bumper. Constructed of heavy-duty steel and available in textured black powder-coat or polished stainless steel finish. Bumper bases available with integrated winch mount or standard light mount; bases include fog light and D-ring mounting locations.
USE INFO #408