Advertisement
JL Stealth Series bumper by Road Armor

A Closer Look at Road Armor’s New Bumper for the Jeep JL

[Sponsored by Road Armor]

Road Armor went through an extensive process to find the most requested and wished-for aspects of aftermarket bumpers for the Jeep JL. The No. 1 thing we heard consistently from consumers was the need to have their own personal styles represented within the products. With that in mind, Road Armor’s engineering team engaged in multiple rounds of product designs with user testing, surveys, and evaluation by industry experts.

In terms of the design of the new JL Stealth series, the most challenging accessory for our engineering team was the mid-width bumper and skid plates. The challenge lies in the need for the winch plate needing to be confined in a small space while still allowing to mount a Warn ZEON 10-S winch that clears the electric sway bar motor on Rubicon models.

About this Sponsored Content

Road Armor’s new JL Stealth series is specifically designed to complement and accentuate the bodylines of Jeep JLs and incorporates the most requested features from consumers and dealers.  Beyond the styling, each JL Stealth series is built to the same exacting standards that Road Armor dealers and customers have come to rely upon—providing a product that is not only built for durability but is also functional and trustworthy.

Here’s a closer look at how to install the mid-width bumper….

Tools Needed

For the removal of factory bumper, shop technicians should be prepared with:

  • 16mm wrenches and/or sockets and ratchet
  • 21mm wrenches and/or sockets and ratchet

To installal the Road Armor JL Stealth bumper, technicians need:

  • 19mm wrenches and/or sockets and ratchet
  • 21mm wrenches and/or sockets and ratchet
  • Corded or cordless drill
  • 9/16” drill bit

How to Remove the Factory Front Bumper:

  1. Disconnect fog light wiring
  2. Remove four nuts per side
  3. Remove bumper
  4. Remove the four frame stiffeners on side of frame. Save two of these bolts for the mid width winch mount 
  5. Drill out top left and right-hand holes to 9/16"

How to Perform the Mid-Width Front Bumper Installation:

  1. Install lights, logo and fair lead
  2. Install winch mount using factory hardware on the side
  3. Install 2 bolt tabs per side in the outer slots using push nuts
  4. Bolt skid plate to bumper using 3/8" hardware, if purchased
  5. Mount bumper to frame using supplied .5" hardware.  (Save small washers for the inside bolts)
  6. Install .5" bolts and small washers in the inside mounts with the nut to the front
  7. Align and tighten
  8. Install winch

In addition to mid-width and full-width bumpers for the JL, Road Armor also offers:

JL Back Bumpers: Made from 3/16-inch smooth steel with 7/8-inch heavy-duty shackle mounts, CNC laser-cut, precision brake-formed and welded by craftsmen inside and out. Road Armor’s back bumpers feature a direct bolt-on design, rear license plate relocation bracket and hardware, integrated recessed Rigid SRM back-up lights or Quake LED QQU451 lights, and are available in premium five-state textured black powder-coat finish or raw steel. They retain all factory back-up sensors and come with a lifetime structural warranty.

JL Flares: Built from highest-quality steel and form-fitted for strength and durability to improve capabilities both on- and off-road. Front JL flares incorporate Road Armor’s proprietary 8-inch amber/white accent lighting and control module for the highest-quality look and finish. Optional stainless steel inner fender liners are also available to finish off the look.

JL Tire Carriers: Made to fit all JL Stealth Series and factory rear bumpers, Road Armor’s heavy-duty tire carriers easily open with the tailgate—no latches or clamps to worry about coming loose on the trails. They include a license plate relocation bracket with integrated rear-view camera mount for OEM camera. The tire carriers also accommodate additional accessories like a 4-gallon Rotopax and HiLift Jack mount, and are available in premium five-state textured black powder-coat finish or raw steel.

Rocker Guards: Two-piece design, made from 3/16-inch smooth steel, CNC laser-cut, precision brake-formed and welded by craftsmen inside and out. Available in premium five-state textured black powder-coat finish or raw steel.

A-Pillar Light 50-Inch Mount: Two-piece design, made from the highest-quality steel, CNC laser-cut, precision brake-formed and welded by craftsmen inside and out. Designed to accommodate most 50-inch LED light bars as well as a pair of cubes near the base of the windshield. The unique design allows the mounts to be easily un-bolted from the cowl base and give JL owners the freedom to fold down the windshield with ease.

All Road Armor products are Made in the USA and built Texas-strong. For more information, call 877-294-2726 or go to roadarmor.com.

JL Stealth Series bumper by Road Armor